|
3qt. Accusump |
 3 qt Accusump
(24-006)
$172 |
|
|
Electric valve kit(24-270) |
 The
Accusump Electric valve provides convenient hands free operation of the
Accusump. By wiring the valve into the ignition switch the Accusump will
automatically turn on with your ignition and provide pre-oiling. This is
especially useful when the Accusump body is mounted in a hard to reach
location.
This kit will convert all manual Accusumps with 1/2" N.P.T. over to the
electric valve. Kit comes with electric control valve with 1/2" N.P.T.
thread, pipe nipple, toggle switch, wire and wire terminals.
Note: The refill rates on the electric valves are suitable and
recommended for Street and Drag Strip use. On Circle Track and Road
Course applications where quick refill rates are required, Canton
recommends the E.P.C valve or the manual valve listed below.
|
|
|
3qt. High Pressure Accusump |
3 qt. high pressure Accusump
(#24-016)
$196
|
|
|
2qt. Accusump |
 2
qt. Accusump
(#24-026)
$164
|
|
|
Electric Pressure Control
Valving |
 E.P.C.
Valving (#24-271, 24-273, 24-275)
The E.P.C. valving has the convenience of an electric valve and the
rapid refill rate of a manual valve. The E.P.C. valving allows the
Accusump to quickly charge with oil when the engine's oil pressure is
above a predetermined level and discharge when the engine's oil pressure
drops below that level.
Comes with an electric valve, regulator, toggle switch, wire, terminals,
and a pipe nipple.
Part #:'s
24-271 E.P.C. valve kit for a discharge of 20-25 PSI
24-271K to refit a standard #24-270 to a #24-271
24-273 E.P.C. valve kit for a discharge of 35-40 PSI
24-273K to refit a standard #24-270 to a #24-273
24-275 E.P.C. valve kit for a discharge of 55-60 PSI
24-273K to refit a standard #24-270 to a #24-275
|
|
|
1qt. Accusump |
 1
qt. Accusump
(#24-046)
$140
|
|
|
Marine Accusump |
 Marine
Accusump
(#24-146, 1 quart)
$308
(#24-126, 2 quart)
$360
|
|
|
Manual valve |
 Manual
Valve (#24-260) for the Accusump.
This valve is the simplest and easiest to install of all the Accusump
valves. It is ideal when the Accusump is being mounted within reach of
the driver.
This manual ball valve has 1/2" N.P.T. fittings.
|
|
Cable Kit |
Accusump Manual Valve & Cable Kit
(#24-506, 6ft.)
The Accusump manual valve cable kit makes it easier for a belted in
driver to open and close the Accusump. Ideal for applications where the
Accusump can not be mounted near the driver, or in a hard to access
location. Kit comes with heavy duty cable, mounting bracket, and
specially designed valve.
Available in both six and ten foot lengths.
|
|
|
|
